7/04/2012

2x4basics Deck Bench Brackets, 2-pack Review

2x4basics Deck Bench Brackets, 2-pack
Average Reviews:

(More customer reviews)
I built a 17' by 12' bench with these brackets and the same composite material my deck is made out of. It is very sturdy and does not have much wobble. I really love that they take up so little of your deck, saving you room. They are easily installed and just what I was looking for! Excellent product!!

Click Here to see more reviews about: 2x4basics Deck Bench Brackets, 2-pack

You determine the size�Using 2x4basics Dekmate Deck Bench Brackets, Black, make a short bench on one side of your deck or use as a railing with integrated seating around the entire perimeter.Just add 2x4�s and 2x6�s (lumber not included). Assembly is simple and easy using basic tools. You can integrate benches into a deck design with much less measuring, cutting, and fitting than making them from scratch. ACQ treated lumber resistant hardware is included.Dekmate Deck Bench Brackets are space saving.Increase your seating using only 7 inches (18cm) of deck space. Turn space that normally isn�t even used into functional outdoor furniture.With our versatile design, Dekmate Deck Bench Brackets can be used for new installations or retrofitted onto existing decks.Installation on docks makes good use of space and provides seating that will not blow away.Dekmate Deck Bench Brackets should be spaced 20 to 24 inches (50cm-60cm) apart and 4 to 12 inches (10cm-30cm) from the end of a bench.The total height of the assembled unit is 36 inches (91cm) from the deck surface.The seat is 17� (43cm) high.Black in color.Alternate colors available include Sand and Cedar/Redwood.

Buy NowGet 11% OFF

Click here for more information about 2x4basics Deck Bench Brackets, 2-pack

7/03/2012

Bench Bracket, pair Review

Bench Bracket, pair
Average Reviews:

(More customer reviews)
I was a bit apprehensive about buying these brackets and thought that the method of anchoring them to the deck would result in a bench that would flex when I pushed back on it. I was wrong and the bench is much sturdier than I thought it would be.
I did end up putting two more screws in per bracket on the bottom near the front.
Overall these created a good looking, easy to install bench. I highly recommend them. They are cheaper than buying redwood to build your own bench brackets.

Click Here to see more reviews about: Bench Bracket, pair

You determine the size Using 2x4basics Dekmate Deck Bench Brackets, Sand, make a short bench on one side of your deck or use as a railing with integrated seating around the entire perimeter.Just add 2x4's and 2x6's (lumber not included). Assembly is simple and easy using basic tools. You can integrate benches into a deck design with much less measuring, cutting, and fitting than making them from scratch. ACQ treated lumber resistant hardware is included.Dekmate Deck Bench Brackets are space saving.Increase your seating using only 7 inches (18cm) of deck space. Turn space that normally isn't even used into functional outdoor furniture.With our versatile design, Dekmate Deck Bench Brackets can be used for new installations or retrofitted onto existing decks.Installation on docks makes good use of space and provides seating that will not blow away.Dekmate Deck Bench Brackets should be spaced 20 to 24 inches (50cm-60cm) apart and 4 to 12 inches (10cm-30cm) from the end of a bench.The total height of the assembled unit is 36 inches (91cm) from the deck surface.The seat is 17-inches (43cm) high.Sand in color.Alternate colors available include Black and Cedar/Redwood. Sold in single units.

Buy NowGet 12% OFF

Click here for more information about Bench Bracket, pair

Generac 4582-2 Ultra Source 15,000 Watt Portable Generator (CARB Compliant) Review

Generac 4582-2 Ultra Source 15,000 Watt Portable Generator (CARB Compliant)
Average Reviews:

(More customer reviews)
I am very happy with this generator, but I would not recommend using it for electronic equipment (computers, TV's, etc), as it is not very stable, especially under large loads.
I ran a test to see what it could handle, below is a description of the items I turned on, and the order in which they were enabled. I connected this generator up to my whole house using a 200 amp manual transfer switch, which was professionally installed by an electrician. The transfer switch has a watt-ometer on it, so I can estimate how much wattage I am using.
1)100 Gallon Hot Water Heater: ~4800 watts. (I opened all the hot water taps to make sure that the heater was running.)
2)3 ton air conditioner (Trane XL19i) ~3600 watts (Set temperature to 65F to ensure that both compressors were working)
3)2 refrigerators. ~800 watts each. (set the temperature to the coldest setting on both of them to make sure they were running)
4)20" TV. ~300 watts
5)PC w/ 2x21" monitors ~300 watts total
6)Washing Machine ~500 watts (put a load in for the spin cycle)
7)Dishwasher ~500 watts
8)Pool Pump ~500 watts
So far all of the above was running at the same time, and everything was fine except the backup battery alarms on the TV and the PC were sounding. It seems the power was not stable enough for those devices, so I turned them off.
I kept everything else running, and I was determined to overload the generator to see if it would shut off as described in the manual. So, I proceeded to turn on some more large and medium appliances.
9)Clothes Dryer ~5700 watts
10)4 stove top burners set to high ~200 watts each
11)Oven set to 450F ~5000 watts?
12)6 overhead lights ~100 watts each
13)Sprinkler / Well Pump ~500 watts
14)Microwave oven set to High ~1500 watts
15)Garbage Disposal ~200 watts
I ran out of appliances and large items that I could turn on. All of the above was running at the same time, which of course is not a typical household scenario. I was very impressed.
My electrician told me that electrical devices all have exaggerated wattage ratings, so you cannot simply look at the back of device and determine how much wattage it will use. This is why my numbers add up to way more than 15,000 watts. In addition, the rating on a generator is the minimum it can handle, so it is possible that the generator could be producing slightly over 15,000 watts, depending on quality of fuel and other factors. Regardless, this test proves that the generator can handle your whole household without a problem, just keep your electronic devices plugged into a more stable generator.
It is quite loud. It sounds like a Harley running at 3500 rpm. Much louder than my 3000 watt generator, and louder than my 2300 psi pressure cleaner. The smell of the exhaust is very strong as well, so keep ventilation at a maximum. Don't place it next to any bushes as the bush will die from the heat and carbon monoxide (I know this from my own experience ;-)
On a separate test, I ran the generator for an extended time period to see how much fuel it uses. I plugged it into my house and ran a more limited set of appliances which would represent a typical day. The fuel consumption was about 1 gallon per hour, so keep this in mind when storing fuel for something like a hurricane. I purchased a fuel storage tank which can hold 120 gallons with a pump on it, and I can also keep 17 more gallons in the generator itself. Of course there is the risk of all this fuel going stale very quickly, so I only purchase it when I see a hurricane coming. If I never need it, I just use it for my cars.


Click Here to see more reviews about: Generac 4582-2 Ultra Source 15,000 Watt Portable Generator (CARB Compliant)



Buy Now

Click here for more information about Generac 4582-2 Ultra Source 15,000 Watt Portable Generator (CARB Compliant)

7/02/2012

Cider Press Kit (No Wood Included) Review

Cider Press Kit (No Wood Included)
Average Reviews:

(More customer reviews)
was majorly confused shopping for this item, and its cost, only to be further discouraged when i went to put it together and discovered it did not have the wood included...and they do sell a MORE expensive version that has the exact same picture, that does include the wood.
should be more clear that it does NOT INCLUDE WOOD!!
(which will cost you several hundred more to get after the fact)

Click Here to see more reviews about: Cider Press Kit (No Wood Included)

If you are handy and want to use your own wood, the Jaffrey Hardware Kit comes with specifications for the wood pieces and all of the hardware you need to build a cider press, including the grinder. The Jaffrey Cider Press is the only apple cider press your family will ever need to purchase--it will last for generations. Making cider and wine with the Jaffrey Cider Press is so much fun from start to finish, everyone at your house will want a turn at this powerful, easy-to-use tool and will start a new family tradition! First, if you purhcase a cider press with the grinder, you'll be happily surprised at how easy it is to operate the rugged stainless-steel toothed grinder - it takes just minutes to reduce a bushel of apples to juice-filled pulp. Then, with the pressing tub loaded, you slowly begin turning the massive pressing screw and watch faces around you light up with anticipation as the fresh, sparkling cider begins flowing into your collecting bucket. And the flavor of those newly pressed juices is beyond compare!After tasting pure, completely natural apple cider you've made yourself, you'll never go back to "store bought".... So much better for kids and grownups than sugary soft-drinks. The Jaffrey Press is so versatile it can also be used to make hard cider and wines.

Buy Now

Click here for more information about Cider Press Kit (No Wood Included)

Mission Stereo/Entertainment Center Woodworking Paper Plan, Build Your Own Review

Mission Stereo/Entertainment Center Woodworking Paper Plan, Build Your Own
Average Reviews:

(More customer reviews)
This is a beautiful piece of furniture and plans were very detailed. I'd buy from the company again. Be aware of the sizes, though. The entertainment cabinet really is 39" deep, when most are 20-24" (the depth is shown in the listing but I thought it was a typo). The interior audio component area, at only 17.5" wide, is too narrow for our components. Unless I attempt to modify the dimensions, I won't be making this cabinet.

Click Here to see more reviews about: Mission Stereo/Entertainment Center Woodworking Paper Plan, Build Your Own

This entertainmet center designed by Brian Murphy of American Furniture Design, will accommodate most TV's with a case up to 40" wide. We designed this unit to complement our entire Mission Line. You will find this an easy project to complete. The legs and the face frames are solid wood and the balance is hardwood plywood. The side storage will hold a tuner, VCR, tape machine, CD player with room for more. The drawers in front offer great storage for CD's and other stuff. The doors are mounted with flipper door hardware and disappear into the case when opened. The wood and material must be purchased at your local lumber supply company; we only supply the woodworking plan and instruction booklet to build the project. Our detailed instructions and plan insure a fine piece of furniture when completed!!!

Buy Now

Click here for more information about Mission Stereo/Entertainment Center Woodworking Paper Plan, Build Your Own

7/01/2012

DuraMax Model 00314 8x8 DuraMate Vinyl Storage Shed with foundation Review

DuraMax Model 00314 8x8 DuraMate Vinyl Storage Shed with foundation
Average Reviews:

(More customer reviews)
I am a contractor who installed this for one of my customers.
I had my 13 year old son assist me in holding the wall panels
while I constructed it. We had it completely built in about
6 hours. It is a nice maintenance-free shed, however for anyone
taller than 5'10", you will need to duck down while inside. I
wired the shed with a light and a receptacle. Unfortunately, I
built the shed in about the only level spot on this person's
property. It was right under the neighbors black walnut tree. As
soon as the walnuts began to drop, they hit the roof and cracked it.
I was called back and I had to build a wooden roof over the shed to
protect it from the falling walnuts. Lesson learned.

Click Here to see more reviews about: DuraMax Model 00314 8x8 DuraMate Vinyl Storage Shed with foundation

DuraMax Model 00314 8'x8' DuraMate Vinyl Shed with included Foundation Kit is ideal for most backyards. Shed was designed to meet the height requirements for most communities. It features wide 61" double doors with padlock eyes. Optional window kit is available. DuraMax Stronglasting vinyl sheds offer the most important factor needed when considering the purchase of a shed whether it is for storage or any other use - strength, durability, attractiveness, size, value for the money and low maintenance. They offer all weather vinyl exterior which is light colored and has a "siding like" grain pattern on the walls, a roof truss steel support system, sturdy steel reinforced wall columns, fire retardant vinyl which is exclusive to DuraMax, wide and tall double doors. Their most consumer friendly feature all starts with their state of the art engineering - each shed is modularly designed with purchase decision, shipping, and building it already in mind. Sheds are available in many sizes to fit many needs; they ship compactly in own box; all parts are pre-cut, pre-drilled, and labeled for easy sorting and assembly. US Polymers Inc. is the largest plastic extruder in the world, every product is backed with warranty and full customer support.

Buy Now

Click here for more information about DuraMax Model 00314 8x8 DuraMate Vinyl Storage Shed with foundation

DuraMax 00214, 10' x 8' Stronglasting Woodbridge Vinyl Storage Shed With Foundation Kit (00214-DM) Category: Duramax Vinyl Sheds Review

DuraMax 00214, 10' x 8' Stronglasting Woodbridge Vinyl Storage Shed With Foundation Kit (00214-DM) Category: Duramax Vinyl Sheds
Average Reviews:

(More customer reviews)
I bought two of these sheds. First, absolutely do not buy the optional floor kit. It's flimsy and it's nearly impossible to line up plywood with the frame holes. Second, the instructions do not match the material. Mostly wrong size screws and holes leads to tremendous frustration. Third, they left out an entire bag of screws... at least they asked for machine screws in the drawings and NONE were in the kit. Fourth, center support bars were too short. This was not due to assembly errors. All the other parts of the same sides did match and there were not any other choices to make bad choices. Fifth, they really could have give you check point measurements along the way to make sure you were assembling it properly. But they don't, so if you missed anything minor detail, like putting a bar in left to right or up and down vs. the reverse, you usually had to disassemble quite a bit to make the correction. four pieces were too short. To save this pathetic purchase I went to Menards and bought some steel and aluminum to extend the bad pieces and drill new support holes and the thing did go together then. 5 hours assembly they said. Maybe at the factory with the right pieces by people who have done it every day for 5 years. I'm typically pretty handy and efficient and have built many things from scratch and kits. I'm on my 4th day of 5-6 hours/day assembling this thing.
Epilogue: Since I made this post I did complete this assembly - and have calmed down a bit. It is a nice shed, though I still do not recommend buying the foundation kit and instead recommend building your foundation yourself faster and much cheaper with either treated 2"x6" treated lumber or some other base. The roof will leak without their recommendation of applying after-assembly sealant, but the shed is pretty solid, square (doors fit and work well, etc.), and well designed - once you get it together. The instructions are very detailed - careful attention must be paid to how holes line up, and very similar parts are not the same, and very few are symmetrical. I have to believe there is an easier way to design the roof support structure for assembly though. Geez guys....
It's possible I could assemble the 2nd shed in a single day with good help... but I very much doubt 5 hours.


Click Here to see more reviews about: DuraMax 00214, 10' x 8' Stronglasting Woodbridge Vinyl Storage Shed With Foundation Kit (00214-DM) Category: Duramax Vinyl Sheds

Item #: 00214-DM. DETAILS: Wide enough to store bikes, mowers, even some boats, this versatile Woodbridge shed is 10' wide and provides 482 cubic feet of storage space, with plenty of headroom. Its contemporary design will beautify your backyard or garden. Perfect for most backyards, our Woodbridge shed is maintenance-free. Constructed of durable all-weather vinyl in neutral ivory, it will never need painting or treating. It will not rust, dent, rot, mildew or fade. It is also fire retardant and much quieter in the rain than any metal shed. The wall columns are reinforced with a solid metal structure, giving the shed a lot of strength and making it easy to hang shelves or garden tools. It-s wind tested to 115 mph and it can support up to 1500 lbs of snow (or two gorillas) on the roof. Includes the 10' x 8' Woodbridge Foundation Kit.
All-weather durable vinyl eliminates painting, treating or maintenance
Contemporary design in neutral ivory will beautify your yard or garden
Tall 'Walk In' Shed
Features wide 61.3" double doors
Metal reinforced wall columns for superior strength
Roof snow load tested up to 1500 lbs (20 lbs/sq ft)
Fire retardant
Assembles in 4-5 hours (2 people recommended for installation)
Includes door handles
Outside dimensions: 126-9/16" wide x 94-3/16" deep x 85-7/16" tall
Storage volume: 482 cubic feet
Weight: 298 lbs
15-year limited warranty
Includes foundation kit
. No returns.

Buy NowGet 14% OFF

Click here for more information about DuraMax 00214, 10' x 8' Stronglasting Woodbridge Vinyl Storage Shed With Foundation Kit (00214-DM) Category: Duramax Vinyl Sheds